Aluminum Material Two Cars Solar PV Garage Canopies Structures
Solar parking canopy structure bracket uses all aluminum anodizing material, beautiful appearance, make full use of the land, protect the car from the sun, wind, rain, snow damage. The patented short foundation design can be used to solve the limited space of the existing parking lot.
2.System structure for solar carport mounting system:
2.Technical Parameters for solar car mounting system:
Installation Site |
Ground or Flat Rooftop |
Panel Layout |
Landscape or Portrait |
Foundation |
Concrete Foundation or Ground Screw |
Material |
Anodized AL6005-T5 |
Tilt Angle |
5-15degrees |
Fastener |
SUS304 &Zinc-Nickel Alloy Electroplated Steel |
Snow Load |
1.2KN/㎡ |
Color |
Customized or Silver |
Wind Load | 60m/s |
Design Standard |
AN/NZS1170,DIN1055,JIS C8955,etc. |
Applicable Solar Module |
Framed or Frameless |
Warranty |
10 Years |
Ground Clearance | 2000mm+ | Small Components | Anodized AL-6005-T5 |
3.Components Details for Solar Canopy Mounting:
Conical Symmetric Cross Beam Specification:L*58*90 Length :3100mm,4100,5100mm
|
Splice for Conical Symmetric Rail Specification:L260MM Components:Hexa Self-Tapping Screw ,With EPDM Washer ST6.3*19
|
Secondary Beam Specification:L*66*90 Material:AL6005-T5 (Anodized) |
Downward Module Clamp Kit Components:Landscape Clamp W45 ,Secondary Beam Clamp Spring Washer M8,Hexagon Bolt M8*20
|
C Clamp Kit
Components:C Clamp, Cross Module,Spring Washer M8 Hexagon Socket Bolt |
Corrugated T Anchor Plate Kit Components:Corrugated Gasket,Corrugated T Plate Hexagon Bolt Kit Material:AL6005-T5(Anodized ) |
Water Chanel Material:AL6005-T5(Anodized) |
|
4.Installation guide for solar carport structure:
1.Grout the bolt embedded on the concrete foundation based on project solution.
2.Fix Corrugated T Anchor Plate Kit on the concrete foundation.
3.Connect the Pre-assemble Support with the Anchor Plate Kit on the concrete foundation.
4.The installation of Pre-assemble Support is done.
5.Install beam.
6.The installation of beam is done.
7.Fix the solar module with Inter Clamp Kit & End Clamp Kit.
8.Installation is done.
5.We provide free customized design service for solar canopy mounting:
1.The dimension of the solar panel: _________(Length*Width*Thickness)
2.How many solar panels do you plan to install for the project?______pcs.
3.What is the tilt angle for solar panel?: _______degree.
4.Could you pls give us the layout of solar panel array? if not, pls tell us the size (Length and Width) of your installation site?
5.How tall is the lowest height from the solar panel to the ground? _______mm
6.What installation orientation for solar panel?_______(Horizontal or Vertical).
7.What's wind speed and snow load?___m/s anit-wind speed and____KN/m2 snow load.
8.Which foundation you need for your coming ground mounting system? ______( ground screw/concrete/pile/pole )
If you can, please tell me Latitude and longitude of your installation site.
6.Other solar panel mounting structure:
Besides carport structure for PV canopy construction, to increase thegreen clean energy of your house, there are some other structure you could use:
● Using solar panel mounts for shingle roof for pitch roof
● Using ballasted ground mount solar racking for flat roof:
7.Application:
The solar canopy parking structures could be used for household or commercial sunshade photovoltaic roof construction such as schools, hospitals and governments,etc.